Software Listing: Triangle Mesh

	MeshWorks | License: Shareware |
	MeshWorks is an advanced mesh editing software built using the powerful MeshLib mesh library. With MeshWorks you can create, transform and modify meshes very easily. A mesh is usually created by exporting a solid model from another CAD system. Meshes created this way are very difficult to modify and sometimes the very nature of their geometry renders them useless for further processing. MeshWorks gives you the power to manipulate meshes so that you can alter their geometry and make them suitable to your needs.. Publisher: Floating Point Solutions Private Limited| Date: 15-08-2003 | Size: 1200 KB
	-

	Mesh To Solid for AutoCAD | License: Shareware |
	Mesh To Solid for AutoCAD is a polygon mesh to 3d solid conversion plug-in for AutoCAD. This plug-in gives AutoCAD the ability to convert a mesh into a solid. Mesh To Solid for AutoCAD adds several commands along with a menu which houses them. Meshes are often used to describe closed solid or open surface objects. However, general solid modeling software do not have methods to manipulate or modify mesh objects. Solid modeling operations such as boolean operations (add, subtract, intersect), extrude, offset, fillet, chamfer, rib, draft, shell, hollow, etc. are possible only with solid or surface objects. Publisher: SYCODE| Date: 29-06-2006 | Size: 2345 KB
	-

	Mesh To Solid | License: Shareware |
	Mesh To Solid is a software to convert a mesh into a solid. A mesh is a set of vertices connected by edges that describe triangular or quadrilateral faces. These faces describe the shape of the object that the mesh describes. Meshes are often used to describe closed solid or open surface objects. However, general solid modeling software do not have methods to manipulate or modify mesh objects. Solid modeling operations such as boolean operations (add, subtract, intersect), extrude, offset, fillet, chamfer, rib, draft, shell, hollow, etc. are possible only with solid or surface objects. Moreover, there is no way to convert a mesh into a solid so that the solid modeling operations can be carried out on it. Publisher: SYCODE| Date: 10-11-2006 | Size: 1605 KB
	-

	Mesh To Solid for Rhino | License: Shareware |
	Mesh To Solid for Rhino is a plug-in for Rhino 2.0 and 3.0. This plug-in gives Rhino to ability to convert a mesh into a solid. A mesh is a useful entity when it comes to defining geometry of an object. However, certain Rhino commands such as boolean operations, offset, extrusion, etc, cannot be performed on meshes. Moreover, Rhino does not export meshes to IGES, STEP, ACIS, ParaSolid, VDA and similar file formats, thereby rendering the mesh model useless for further solid modeling in another CAD system. Rhino imports STL, OBJ and other similar files as meshes only. If you need to modify these imported objects you need to convert them into solids. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 1400 KB
	-

	Mesh Booleans for AutoCAD | License: Shareware |
	Mesh Booleans for AutoCAD is a mesh boolean modeling plug-in for AutoCAD®. Mesh Booleans for AutoCAD gives AutoCAD the ability to perform boolean operations between PolyFace Meshes, Polygon Meshes and 3D Solids or a combination of all. The geometry of a solid object can be described in AutoCAD as a 3D Solid, PolyFace Mesh or a Polygon Mesh entity. However, AutoCAD's solid modeling commands (Union, Subtract and Intersect) work with 3D Solids only. AutoCAD does not provide any commands to perform boolean operations on PolyFace Meshes and Polygon Meshes. Mesh Booleans for AutoCAD removes this limitation by adding new mesh modeling commands to AutoCAD that give AutoCAD the ability to perform boolean operations (add, subtract and intersect) between PolyFace Meshes, Polygon Meshes and 3D Solids or a combination of all. Publisher: SYCODE| Date: 07-09-2006 | Size: 2757 KB
	-

	MeshWorks for Rhino | License: Shareware |
	MeshWorks for Rhino is a plug-in for Rhino. It adds a variety of mesh manipulation commands to Rhino. Some of the useful commands are given below: Hollow: This command hollows the mesh to a given wall thickness. Hollowing is particularly useful while preparing a model for Rapid Prototyping as it saves material, time and money while building a prototype. Offset: This command offsets a mesh to either shrink or expand it. PointsToMesh: This command creates a mesh from a set of points. Stitch: This command knits loosely tied faces of a mesh and attempts to make a mesh water-tight. FillHoles: This command adds faces to an existing mesh in order to fill any holes. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 3 KB
	-

	TerrainCAD | License: Shareware |
	TerrainCAD is a terrain generation, editing and modeling software. Powered by TerrainLib, TerrainCAD employs blazing fast and robust algorithms to create and modify terrain meshes in no time. The capabilities of TerrainCAD can be broadly classified as (1) Terrain Generation, (2) Terrain Editing, and (3) Terrain Modeling Terrain Generation: TerrainCAD creates a terrain mesh from a set of unorganized survey points, breaklines and contours. The terrain mesh is created as a Delaunay Triangulation, which is regarded as the best method to create a terrain mesh from unorganized point data. TerrainCAD can also generate a terrain mesh directly from contours only. Publisher: SYCODE| Date: 13-09-2005 | Size: 2394 KB
	-

	MeshCAD for Rhino | License: Shareware |
	MeshCAD for Rhino is a mesh editing and modeling plug-in for Rhinoceros. Powered by MeshLib, MeshCAD for Rhino employs robust algorithms to create and modify meshes. MeshCAD for Rhino adds several commands to Rhino. These commands can be easily invoked from Rhino using the MeshCAD menu which is appended to the main Rhino menu. The features of MeshCAD for Rhino can be broadly classified as: Mesh Creation: MeshCAD for Rhino can create a mesh from a set of unorganized points. These points can describe the top surface (such as a points data from a geographical survey) or they can describe a closed object. Publisher: SYCODE| Date: 10-05-2006 | Size: 2759 KB
	-

	Terrain for Rhino 3.0 | License: Shareware |
	Terrain for Rhino is a terrain modeling plug-in for Rhinoceros (commonly known as Rhino). This plug-in gives Rhino the ability to create a terrain mesh from a set of unordered points. The terrain mesh is created as a Delaunay Triangulation, which is regarded as the best method to create a terrain mesh from unorganized point data. Terrain for Rhino is powered by PointLib, a state of the art terrain modeling library developed by SYCODE. Terrain for Rhino is designed to be extremely user friendly and easy to use. The plug-in adds a new command to Rhino called Terrain. The Terrain command has a single parameter called Search Radius. Publisher: SYCODE| Date: 11-10-2004 | Size: 2303 KB
	-

	Terrain for AutoCAD | License: Shareware |
	Terrain for AutoCAD is a terrain modeling plug-in for AutoCAD. This plug-in gives AutoCAD the ability to create a terrain mesh from a set of unordered points, lines, polylines and splines. The terrain mesh is created as a Delaunay Triangulation, which is regarded as the best method to create a terrain mesh from unorganized point data. Terrain for AutoCAD can also import a set of points from a text file containing point coordinate data along with point numbers and point descriptions. Terrain for AutoCAD is powered by PointLib, a state of the art terrain modeling library developed by SYCODE. Terrain for AutoCAD is designed to be extremely user friendly and easy to use. Publisher: SYCODE| Date: 16-05-2006 | Size: 2396 KB
	-

	3DM Import for SolidWorks | License: Shareware |
	3DM Import for SolidWorks is a Rhinoceros (.3dm) file import add-in for SolidWorks®. This add-in gives SolidWorks the ability to import geometric data from 3DM files. 3DM Import for SolidWorks reads polygon mesh and curve data stored in 3DM files and imports it into SolidWorks. A polygon mesh in a 3DM file is comprised of a set of triangular/quad faces. 3DM Import for SolidWorks creates trimmed planar surfaces for each triangle/quad and knits them together to create a body. If the polygon mesh is closed (i.e. it does not contain boundary edges) then 3DM Import for SolidWorks will create a closed body feature, otherwise an open surface will be created. Publisher: SYCODE| Date: 23-11-2006 | Size: 1314 KB
	-

	3DS Import for SolidWorks | License: Shareware |
	3DS Import for SolidWorks is a 3D Studio® (.3ds) file import add-in for SolidWorks®. This add-in gives SolidWorks the ability to import geometric data from 3DS files. 3DS Import for SolidWorks reads polygon mesh data stored in 3DS files and imports it into SolidWorks. A polygon mesh in a 3DS file is comprised of a set of triangular faces. 3DS Import for SolidWorks creates trimmed planar surfaces for each triangle and knits them together to create a body. If the polygon mesh is closed (i.e. it does not contain boundary edges) then 3DS Import for SolidWorks will create a closed body feature, otherwise an open surface will be created. Publisher: SYCODE| Date: 23-11-2006 | Size: 1190 KB
	-

	GeoPro | License: Shareware |
	GeoPro is the next level of our application geometry. It features the following aspects: Triangles: Special triangles, Properties of Right triangles, Congruent of Right Triangle. Plane Areas: Rectangle, Trapezoids, Circle, right triangles. Polygon: Regular polygons with n-sides. Solids: Prisms, Volumes, Pyramid and cones, Frusta, Spheres and Surface areas. Centroids: Centroids of a triangle, parabola, power curve, etc. You can calculate the area, volume or perimeter of a: Square Trapezoid Sphere Circle. Publisher: Pdasi| Date: 15-11-2004 | Size: 693 KB
	-

	OBJ Import for Solid Edge | License: Shareware |
	OBJ Import for Solid Edge is a Wavefront (.obj) file import add-in for Solid Edge®. This plug-in gives Solid Edge the ability to import geometric data from OBJ files. OBJ Import for Solid Edge reads polygon mesh data stored in OBJ files and imports it into Solid Edge. A polygon mesh in an OBJ file is comprised of a set of triangular and/or quad faces. OBJ Import for Solid Edge creates trimmed planar surfaces for each triangle/quad and knits them together to create a body. If the polygon mesh is closed (i.e. it does not contain boundary edges) then OBJ Import for Solid Edge will create a closed body feature, otherwise an open surface will be created. Publisher: SYCODE| Date: 23-11-2006 | Size: 1281 KB
	-

	3DM Import for Solid Edge | License: Shareware |
	3DM Import for Solid Edge is a Rhinoceros (.3dm) file import add-in for Solid Edge®. This plug-in gives Solid Edge the ability to import geometric data from 3DM files. 3DM Import for Solid Edge reads polygon mesh data stored in 3DM files and imports it into Solid Edge. A polygon mesh in a 3DM file is comprised of a set of triangular and/or quad faces. 3DM Import for Solid Edge creates trimmed planar surfaces for each triangle/quad and knits them together to create a body. If the polygon mesh is closed (i.e. it does not contain boundary edges) then 3DM Import for Solid Edge will create a closed body feature, otherwise an open surface will be created. Publisher: SYCODE| Date: 23-11-2006 | Size: 1304 KB
	-

	STL Import for Solid Edge | License: Shareware |
	STL Import for Solid Edge is a Stereolithography (.stl) file import add-in for Solid Edge®. This plug-in gives Solid Edge the ability to import geometric data from ASCII and Binary STL files. STL Import for Solid Edge reads polygon mesh data stored in STL files and imports it into Solid Edge. A polygon mesh in a STL file is comprised of a set of triangular faces. STL Import for Solid Edge creates trimmed planar surfaces for each triangle/quad and knits them together to create a body. If the polygon mesh is closed (i.e. it does not contain boundary edges) then STL Import for Solid Edge will create a closed body feature, otherwise an open surface will be created. Publisher: SYCODE| Date: 23-11-2006 | Size: 1284 KB
	-

	AMSES Plate | License: Shareware |
	FEM analysis and design of reinforced concrete slabs according to Eurocode 2. The program uses enhanced user interface for the geometry and load input. The load is organised in actions (load groups) which are combined in load cases. No special care is needed for mesh, since the mesh is automaticaly generated. Kirchhoff (thin plate theory) internal forces are calculated, principal moments, design moments and reinforcement areas.. Publisher: Ainet projektiranje| Date: 20-10-2003 | Size: 2033 KB
	-

	KwikTrig | License: Shareware |
	For quick solutions to trigonometry and geometry problems from expert to novice. Even with no math skills, and little to no computer skills YOU can do it!. Publisher: John Fracaro| Date: 20-04-2003 | Size: 2232 KB
	-

	STL Export for AutoCAD | License: Shareware |
	STL Export for AutoCAD is a plug-in for AutoCAD 2000, 2000i, 2002 and 2004. This plug-in gives AutoCAD the ability to export geometric data to ASCII as well as binary Stereolithography (STL) files. AutoCAD already has a "STLOUT" command which exports STL files. But unfortunately it has some limitations. Firstly, it exports only 3D Solids and that too only one at a time. It does not export 3D Face, Polygon Mesh and Polyface Mesh entities which can very well be a part of a STL model. STL Export for AutoCAD addresses these issues. With STL Export for AutoCAD you can now export multiple 3D Solid, 3D Face, Polygon Mesh and Polyface Mesh entities to a single STL file. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 400 KB
	-

	Mathematics | License: Freeware |
	Number Systems - Number Conversion - Number Types - Compound Measures Roots - Angles and Parallels - Triangle Ratios - Triangle Angles - Percentages - Ratios - Fractions - Vectors - Circle Angles - Laws - Algebra 0. - Algebra 1. - Algebra 2. - Mathematical Rules - Powers and Indices - Geometry - Simplifying - Equations - Graphing - Slope and Translation - Curves and Angle Conversion - Personal Finance - Data Analysis - Binary Numbers - Binary Arithmetic.. Publisher: eptsoft| Date: 01-01-2007 | Size: 4345 KB
	-

	Torrent Searcher SA | License: Freeware |
	Torrent Searcher SA is a peer-to-peer client for Windows that allows you to download any file-type found on several popular P2P networks. Torrent Searcher SA is FREE & contains NO Spyware. Torrent Searcher SA can connect to up to 4 separate Peer-to-Peer networks, providing access to hundreds of thousands of diverse users, all from one single program. You can download/upload from the EDonkey2000 (ed2k), Gnutella, BitTorrent and Gnutella2 (G2) Networks. Torrent Searcher SA introduces yet another innovative feature: Collections! Collections group previews of album covers, descriptions, and song lists all in one complete package. Publisher: Torrent Searcher| Date: 05-08-2005 | Size: 2404 KB
	-

	PIX Import for SolidWorks | License: Shareware |
	PIX Import for SolidWorks is a Dr. Picza (.pix) file import add-in for SolidWorks®. This add-in gives SolidWorks the ability to import geometric data from PIX files. PIX Import for SolidWorks reads surface and polygon mesh data stored in PIX files and imports it into SolidWorks. If the PIX file contains a scan of a surface PIX Import for SolidWorks creates a single trimmed surface describing the scanned surface. This surface can be converted into a solid by giving it a thickness. If the PIX file contains the scan information in the form of a polygon mesh PIX Import for SolidWorks creates a body describing the object that was scanned. Publisher: SYCODE| Date: 23-11-2006 | Size: 1194 KB
	-

	T.Ed Pro Terrain & World Editor | License: Shareware |
	Overview of Purpose: T.Ed is a complete solution for making huge outdoor worlds: The technique behind designing and using terrain objects can be a minefield of choices, as there are so many different ways of doing it! T.Ed is designed primarily for games programmers and 3D artists to make those choices easier. There are 2 main categories regarding terrains in games, 'Mesh' and 'Dynamic/LOD'. T.Ed can help in the development of both! T,Ed is a dedicated terrain tool to allow the creation of small to large mesh landscapes, either as a series of blocks, or as a single terrain. It allows for superb blended textures either by using vertex alpha or by rendering a 'Supertexture' for each terrain block. Publisher: D-Grafix| Date: 10-08-2006 | Size: 7812 KB
	-

	PIX Import for AutoCAD | License: Shareware |
	PIX Import for AutoCAD is a plug-in for AutoCAD 2000, 2000i, 2002 and 2004. This plug-in gives AutoCAD the ability to import geometric data from PIX files. PIX files are the native file format of a digitizer software called Dr. Picza which comes bundled with Roland DG digitizers. PIX Import for AutoCAD gives AutoCAD the ability to import data from PIX files. You can import the data as points, lines, polylines, splines, faces, polyface mesh or polygon mesh. PIX Import for AutoCAD is very easy to use. It adds a new command to AutoCAD called "PIXIN". Simply type "PIXIN" at the AutoCAD command prompt and select a PIX file to import. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 400 KB
	-

	3DS Import for Solid Edge | License: Shareware |
	3DS Import for Solid Edge is a 3D Studio (.3ds) file import add-in for Solid Edge®. This plug-in gives Solid Edge the ability to import geometric data from 3DS files. 3DS Import for Solid Edge reads polygon mesh data stored in 3DS files and imports it into Solid Edge. A polygon mesh in a 3DS file is comprised of a set of triangular faces. 3DS Import for Solid Edge creates trimmed planar surfaces for each triangular face and knits them together to create a body. If the polygon mesh is closed (i.e. it does not contain boundary edges) then 3DS Import for Solid Edge will create a closed body feature, otherwise an open surface will be created. Publisher: SYCODE| Date: 23-11-2006 | Size: 1216 KB
	-

	Point Cloud | License: Shareware |
	Point Cloud is a reverse engineering software to process point clouds. Point Cloud can reconstruct a triangular mesh over a cloud of points or drape a surface over the points. A point cloud can be created by scanning the surface of an object (surface scan) or by scanning the entire solid (solid scan). Point Cloud understands this difference and processes points differently in each case. Point Cloud also has the ability to compensate for probe diameter. There is an inherent error with probe based scanners since they digitize points at the center of the probe. Point Cloud takes care of this very efficiently. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2003 | Size: 800 KB
	-

	Rotor 3D Viewer | License: Shareware |
	Rotor team is proud to present you with the newest version of popular program which allows you to make your 3D presentations both with 3D models and sound! We offer you to relax true convenience. What is Rotor 3D? Rotor 3D Viewer is a viewer, which quickly generates a high-quality display of your 3D models. It is one of the best easy and convenient ways of creating 3D presentations. Rotor 3D supports 3D models in 3ds format, sound files in .mp3, .wav and .wma formats. This program can be very useful to you at conferences and seminars, in lessons or presentations. If you are a teacher or scientist, this program will allow you to improve the quality of your lessons and conversations, and will make them more interesting and complete. Publisher: Rotor Software. Seyna Ltd.| Date: 27-12-2005 | Size: 1974 KB
	-

	Firevector Atmoweld | License: Shareware |
	After the installation on your PC, Firevector Atmoweld appears as a 3D Studio Max utility plug-in. All the scenes opened in 3D Studio MAX can be exported to LightWave3D Object File (LWO). There are several types of options that affect the result to be produced by Atmoweld Exporter. In particular before the export you can adjust validation, texture, material, and mesh options. All the settings are easily managed from Exporter's dialog. Firevector Atmoweld supports the following versions of 3D Studio Max: 5.1, 6.0, 7.0, 7.5, 8.0. Exporting 3D Studio MAX scenes to LWO makes perfect sense when you need to share your work between 3D Studio Max and Newtek LightWave3D and/or Luxology Modo. Publisher: Firevector Technologies| Date: 10-02-2007 | Size: 3145 KB
	-

	Steel-Link.com Suite | License: Freeware |
	Absolutely the best and easiest to use tools for the steel construction industry. The feet and inches calculator accepts all commonly used types of feet and inches input. The simple interface makes it extremely easy to use. The toolbox inculdes a stair solver, triangle solver, circle solver, and a steel shapes viewer. The Resource Browser is a web browser with built in links to many valuable resources for the steel construction industry. The calculator can be closed to your system tray so it is always at your fingerips and ready to use. The units that can be shown are: Feet and Inches, Decimal Inches, Decimal Feet, and Millimeters. Publisher: Finch Software| Date: 30-01-2006 | Size: 1568 KB
	-

	OBJ Export for AutoCAD | License: Shareware |
	OBJ Export for AutoCAD is a plug-in for AutoCAD 2000, 2000i, 2002 and 2004. This plug-in gives AutoCAD the ability to export geometric data from AutoCAD to Alias|Wavefront OBJ files. Alias|Wavefront is the world's leading innovator of 2D/3D graphics technology for the film, video, games, interactive media, industrial design, automotive industry and visualization markets. Their .OBJ ASCII file format is widely accepted the world over for exchanging graphical data between drafting applications. OBJ Export for AutoCAD can export the following AutoCAD entities: 3D Face, Polygon Mesh, PolyFace Mesh and Solid. Publisher: Floating Point Solutions Private Limited| Date: 01-04-2002 | Size: 400 KB
	-

Page: 1 | 2 | 3 |